CREATE YOUR OWN GATE OPERATOR
ACCESS CONTROL DRAWINGS
AS EASY AS

GATABASE 2000 is the most comprehensive gate operator layout design program in the industry! You choose from over 500 pre drawn layouts, then copy, paste, point, drag and click your way past contracting or employing a CAD draftsmen.

GATABASE 2000 is offered in PLAN and ISOMETRIC views:

The PLAN drawing below was created with GATABASE 2000 Version Plan 2.1.
Loops were included in pre-drawn layout.  Access device on stand, photo eyes and gate edge were copy and pasted to complete drawing. Time to create this drawing was less than 5 minutes!

The ISOMETRIC drawing below is the same as the above layout created with GATABASE 2000 Version ISO 2.1.  Loops, photo eyes and gate edge were included in the pre-drawn layout.  Access device on stand was copy and pasted into layout.  Line and arrows between photo eyes was added to complete drawing. Time to create this drawing was less than 3 minutes!

You can easily add text and arrows to label the above drawings. The most common access devices devices are available to be copy and pasted to your layouts.

GATABASE 2000 provides:

  Pre-drawn gate operator layouts with chain link and ornamental iron fences and gates shown both right and left hand.
  Pre-drawn slide gate layouts for cantilever, roller v-track and front wheel rear track gates
  Pre-drawn gate operator layouts include gate rollers, wheels, tracks and and hardware.
  Pre-drawn swing gate layouts for ground mount and acuator type operators.
  Pre-drawn layouts with driveway, curbs, block walls and islands.
  Pre-drawn layouts of the same gate designs with the different locations of  loops and photo eyes
  Pre-drawn access control devices with or without gooseneck stand.
  Pre-drawn GATABASE CLIP ART that you use to create your presentations.

 1.
Choose the GATABASE slide or swing gate operator layout(s) that best represents your jobsite layout. Choose from up to 15 of the same gate layouts per page with the same chain link or ornamental iron fence, gate and hardware. Included in the layouts will be "Right Hand", "Left Hand", "Bi-Parting / Master-Slave" and "Bi-Direction Traffic" with the most common locations of vehicle loops, photo eyes and gate sensing edges .  Copy and paste the layout you desire to a work sheet.

2.
Utilize GATABASE CLIP ART to copy and paste and complete your drawing.
The most common access devices; telephone entry systems, intercom communication systems, digital key pads, card readers (insertion, touch plate and proximity) are all pre-drawn with or without the gooseneck pedestal stand for you to click, copy and paste. Dual height pedestal stand with access devices are also available.

The clip art section  also includes pre-drawn radio receivers and transmitters, timers, computers, telephones, warning signs, gate edges, photo eyes, vehicle detector control box, warning lights, strobe detector and vehicles.  Pre-drawn trees, bushes and plants are available with the plan versions.

This is the step you will put all your drawing components together.  Copy and paste the pre-drawn accessory drawings and landscape to your main layout.  Move and re-size the drawings to fit your layout. Group and save all your imported drawings to create one completed layout.

3.
Add text, labeling and arrows to your presentation.  Adding text to your drawings is fun, fast and easy because you can create any size text frame anywhere you desire in your layout.  Then enter your text and labeling. You can border and pattern your text frames and text with just clicking your mouse button. Draw lines and arrows in seconds. Utilize the FREE GATABASE Sequence of Operation to copy and paste pre-written text that explains how your gate operator access system will function.
 
 

YOU HAVE CREATED A PROFESSIONAL GATABASE DRAWING!

Provided with the GATABASE CD are printed manuals of the same that are on the CD.  Using the printed manuals, you will find the Pre-Drawn layouts and accessories that best represents the job you are working on. Go to the same pages on your GATABASE 2000 file to find, copy and paste the layouts and accessories to your drawings.  It is as easy as 123!

Contact GATABASE by e-mail  <gatabase@qwest.net>

Contact GATABASE by phone  602-494-9005
 

Your cost for the following GATABASE products.

Part Number                               Product                                       Your Cost (Includes shipping)

The above noted versions of GATABASE 2000 are provided with the CD and manuals and also includes the following FREE INFORMATION!

FREE Design / Estimate Sheets on the CD for you to print out.
    Utilize the GATABASE comprehensive design work sheet to get all
    the correct information to comfortably estimate your jobs.  There is
    space on the design worksheets to enter the products you will be
    providing.  Also, there is an electrical power section and space for
    subcontactors, permits, etc.

  FREE System Sequence of Operation on the CD.
    The most common sequences of vehicle gate access pre-written for you
    to copy and paste.

  FREE Glossary of Terms on the CD.
    Education of vehicle gate operator systems "at your finger tips"

The above free information is only available on the Microsoft Publisher Versions

Thank you for your interest in the GATABASE!